SkyRC MC3000 lader

Firmware 1.11 or 1.10 

Hardware with reinforced pins to prevent the broken slider problem. (In older versions the plastic pins holding the pins sometimes broke)

Input Power DC 11-18V/4A
Charge Current Range 0.05-3.00A
- max. 3A (x4 slots)
Discharge Current Range 0.05-2.00A
- max. 2A (x4 slots for NiMH/NiCd/NiZn batteries, but for Li-ion/Lilo4.35/LiFePO4 batteries only 1 slot can be discharged with 2A)
Max. Charge Power 50W
Max. Discharge Power 15W
Battery Chemistry Type NiMH, NiCd, NiZn, Eneloop,Lithium-Ion, LiIo4.35, LiFePO4
Battery Capacity 100-50000mAh
Operating Temperature 0-40℃
USB Power Output DC 5V/2.1A
Dimensions(LxWxH) 200×124×69mm
Weight(Without DC Adaptor) 600g

No-nonsense Modes
There are total 6 operation modes ('Break_in' for NiMH/NiCd/Eneloop batteries only, 'Storage' for Li-Chemistry batteries only).
Charge the battery at the selected rate. Suitable for frequently used batteries. Discharge the batteries at the selected rate. Suitable for batteries stored for more than two weeks but less than 3 months or the batteries showing poor performance. This mode can also determine the battery capacity for battery matching. Battery forming is a charge-discharge-charge cycle which forces a full charge into the new batteries and those stored for more than 3 months at a very low rate to activate the batteries. Performs charge-dicharge cycle for up to 99 times. Cycle mode can remove memory effect of rechargeable batteries. Charge/Discharge a lithium battery to a voltage which is, theoretically, better for storing a long time while maintaining the maximum of its lifespan.

Maximum safety:
- Current Limit
- Capacity Limit
- Temperature Threshold
- Charging Time Limit